This is Touch Screen GSM & PSTN DTMF dialing Professional intruder fire alarm systems. It can be equipped with motion sensor, infrared /MW and intelligent analysis intruder detector, pet immunity & anti mask detector, glass break detector, smoke detector, heat detector, gas leakage detector etc.
The standard package is one panel, one door contact, one pir and two remotes. Please contact us to add other detectors if you need.

GSM can be set on or off and GSM and tel. line priority can be set. It can be operated via telephone to call SIM card or by SMS.
It is voice and menu guide programming and setting. And just need to push down the bracket to install on wall, then push panel on to fix it.

Function Introduction:
1. With voice indication all around the operation.
2. LCD screen indication and touch screen glass panel.
3. Total 32 wireless zones which enable to learn code automatically or enter code manually on the keypad. 8 wired zones which enable to be connected with N/C or N/O detectors.
4. Enable enroll total 8 wireless remote, 8 electronic switch and unlimited one way wireless siren.
5. Zone programmable: Before products left factory, they are programmed with alarm type and delay or instant for each zone as factory default. The setting can be modified by user.
6. Six follow me phone No.(voice alarm receiving phone No.), 2 for CMS and 4 for private alarm receiving.
7. Clock & event list: built-in clock, can be set according to local time.
8. Enable record and inquiry 120 alarm event messages including alarm type, zone number, time etc.
9. Administrator password and user password are separated.
10. Alarm type auto identify: LCD screen will display alarm zone#, alarm type, alarm icon and report details to CMS when it is connected.
11. Can remote control panel via telephone to arm, disarm, listen to the spot, trigger siren, switch on/off electronic appliance (need to buy appliance switch)
12. Vandal-proof and Anti-tamper function.
13. With built-in siren and can enroll extension wireless siren. Both can be set on or off when alarming.
14. Wired/wireless zone real time monitoring: active the real time monitoring function, then if zone with trouble when doing arm/disarm operation then panel will indicate zone fault.
15. Wireless detector low battery real time warning.
16. Neighbour Panel alarm instead function: when tel line off, panel will send signal to preset neighbour panel to report alarm details.
17. With emergency key on panel and remote.
18. GSM alarm function.

Technical Specification:
1. Defense zones: 8 wired and 32 wireless with max. 8 remotes.
2. Zone type: delay, perimeter, burglar, emergency, fire, gas, key, door bell
3. Frequency: 433MHz
4. Signal transmit distance: 100~150meters (in open area)
5. Power supply: 12V /500mA (without GSM), 12V/2A (with GSM)
6. Builtin Rechargeable battery: 12V/1000mA
7. Main machine static current: 50mA/15V (exclude high siren current)
8. Main machine alarming current: <300mA /15V (exclude high siren current)
9. Main machine 12V maximum output current: <=100mA for wired detectors
10. Recording time: 15s
11. The trigger delay of wired zones:>=100ms
12. The method of alarming dial: DTMF & GSM
13. DTMF dial frequency variation: <1.5%
14. Communication Protocol with CMS: Ademco Contact ID
15. Dimension of panel: 230*160*38mm
16. Weight of Panel: 550g
17. Color of panel: white.